Dice Box Holder | Deer Skull Dice Holder | Deer Skull Dice Box

$59.99

SKU: 754194406901 H Categories: , Tags: , , , ,

Description

Are you heading off to your next session and needing a way to carry your most treasured dice?  Be sure to bring along this unique Deer Skull Dice Holder, that has magnets to hold it closed with enough force that you can lift the top and the bottom will stay attached (I wouldn’t recommend to actually carry it like this or any higher than a few inches off the table).  With seven spaces to display or hold a full set of dice and then a special spot to hold say a D20 in the crown of the Deer Skull.  The bottom half stands at 2.19 inches, the top at 4.32 inches, for a total when put together of about 6 1/2 inches tall and just over 4 1/2 inches wide.  With every Dice Holder you get a free set of dice.  Printed in colors that resemble certain house colors?

Color Options:

These Dice Holders are made with 3 different filaments “painted” to highlight the different details taking about 30 hours to print.

  • 3 Color Filaments Deep Blue Egg, Black skull and petals, Dark Silver crown and petals
  • 3 Color Filaments Red Egg, Black skull and petals, Gold crown and petals
  • 3 Color Filaments Yellow Egg, Black skull and petals, Shiny Grey crown and petals
  • 3 Color Filaments Green Egg, Black skull and petals, Light Silver crown and petals

 

Details

  • I print to order most items to order and typically need 1 to 3 days for single items like miniatures or terrain elements and 3 to 5 days for most bundles. All orders have a standard processing time of 10 days unless explicitly stated otherwise; for example for large systems or complete builds.
  • Printed with Non-Toxic PLA utilizing an FDM (FFF) printing process. PLA is a vegetable-based material and is a fully biodegradable, recyclable, and renewable material. PLA starts to melt around 178°C or 350°F and can start to become malleable around 60°C or 140°C. PLA is very stable when stored out of direct sunlight (for extended periods) and in a climate-controlled environment, for example inside a residence.
  • Material color can differ from the images. As a standard, I try and print miniatures with gray or blue translucent color, rocks/stones with a gray or granite color, wood foliage with a brown or wooden color, terrain (outside of rocks/stone). My goal is to match the print material to make sense with the object being printed to give a good base for you applying your own style via painting. Due to supply shortages, prints may be printed in gray material.
  • Some prints within jobs may have differing colors due to filament manufacturer formula changes.  I do my best to avoid any of these possibilities, however you may find some slight color changes.
  • Scaled for use with 28mm miniatures feet to eyes and with a base diameter of 25mm. Models may vary slightly in size due to the printing process and expansion/contraction of the material.
  • All of my prints are unfinished. At times, some clean up may be required as some lines or imperfections may be seen. I do print slowly and perform a quality check on all prints before shipping or delivery. All models will need some final work before use or painting in the form of sanding and/or priming. Prints may require assembly which could include the use of adhesives, we recommend a clear Epoxy Glue.
  • I include some items in the pictures to give a sense of the scale of the print. Some items I commonly use are dice, terrains, tiles, and miniatures. These are not included in the item being purchased unless expressly called out in the description. Bundles, Systems, Complete games, etc. will include a list of all the elements included in the purchase, items not expressly listed but in pictures are not included in the purchase.
  • CAUTION CHOKING HAZARD! This is not intended for use by children and contains small parts that pose a choking hazard and may contain sharp edges or points. Keep away from children and pets!

 

Notes

  • If you want a custom color(s) or custom scale for the models we can provide that for you. Please contact me for a quote with all the models & miniatures you want to be scaled or colored and what you are looking for. For miniatures from our design partners, I am unable to change the design itself, only elements of the printing process; size, material colors, printing parameters, etc.
  • Model is provided to us by Layers In Green as an officially licensed commercial seller. Please visit https://www.patreon.com/Layersingreen/ for the source files. We are capable of printing ALL of Layers In Green designed models, please contact us for requests of any of the designs and we will add the product for you!

Additional information

Color

3 Color Egg (Red/Black/Gold), 3 Color Egg (Blue/Black/Dark Silver), 3 Color Egg (Yellow/Black/Shiny Grey), 3 Color Egg (Green/Black/Silver)