HeroQuest ADD-ON Utility Package | Add-on Set
$99.99 – $199.99
This is a Add-on Package containing items to make your game all the more fun. TRAPS! Secret Doors! Stairs that 3 minis can fit on! Rubble! Larger Rubble! What more could you want? Magnetic? Done!
This is a Add-on Package containing items to make your game all the more fun. TRAPS! Secret Doors! Stairs that 3 minis can fit on! Rubble! Larger Rubble! What more could you want? Magnetic? Done! Yes there are 2 variations of this pack, one unpainted and the other painted, once the paint it dry I will be uploading those photos for the listing. All of these items were created by The Dragons Rest, which I am a commercial seller for.
Includes 60 Items:
- 4 Sets of Stairs
- 8 Secret Doors (not hinged)
- 5 Trap Pit
- 4 Small Rubble
- 4 Large Rubble
- 4 Trap Door Hollow (assembly required with Trap Door DOORS)
- 6 Trap Door DOORS
- 2 Trap Stairs Down (assembly required with Trap Door DOORS)
- 23 Floor Cap Pieces
- 40 Half Clips
- 40 Magnets (assembly required- Glue recommended)
This is a large print and will take approximately 1-2 weeks to print.
This product uses the DRMC Clip System by Dragons Rest which supports standard and magnetic clips. By default, we only supply standard, non-magnetic, clips but also sell the magnetic versions in the store. Please be aware, the DRMC Clip System is not intended to be used with other tile systems.
- I print to order most items to order and typically need 1 to 3 days for single items like miniatures or terrain elements and 3 to 5 days for most bundles. All orders have a standard processing time of 10 days unless explicitly stated otherwise; for example for large systems or complete builds.
- Printed with Non-Toxic PLA utilizing an FDM (FFF) printing process. PLA is a vegetable-based material and is a fully biodegradable, recyclable, and renewable material. PLA starts to melt around 178°C or 350°F and can start to become malleable around 60°C or 140°C. PLA is very stable when stored out of direct sunlight (for extended periods) and in a climate-controlled environment, for example inside a residence.
- Material color can differ from the images. As a standard, I try and print miniatures with gray or blue translucent color, rocks\stones with a gray or granite color, wood\foliage with a brown or wooden color, terrain (outside of rocks\stone). My goal is to match the print material to make sense with the object being printed to give a good base for you applying your own style via painting. Due to supply shortages, prints may be printed in gray material.
- Some prints within jobs may have differing colors due to filament manufacturer formula changes. I do my best to avoid any of these possibilities, however you may find some slight color changes.
- Scaled for use with 28mm miniatures feet to eyes and with a base diameter of 25mm. Models may vary slightly in size due to the printing process and expansion\contraction of the material.
- All of my prints are unfinished. At times, some clean up may be required as some lines or imperfections may be seen. I do print slowly and perform a quality check on all prints before shipping or delivery. All models will need some final work before use or painting in the form of sanding and/or priming. Prints may require assembly which could include the use of adhesives, we recommend a clear Epoxy Glue.
- I include some items in the pictures to give a sense of the scale of the print. Some items I commonly use are dice, terrains, tiles, and miniatures. These are not included in the item being purchased unless expressly called out in the description. Bundles, Systems, Complete games, etc will include a list of all the elements included in the purchase, items not expressly listed but in pictures are not included in the purchase.
- CAUTION CHOKING HAZARD! This is not intended for use by children and contains small parts that pose a choking hazard and may contain sharp edges or points. Keep away from children and pets!
- If you want a custom color(s) or custom scale for the models we can provide that for you. Please contact me for a quote with all the models & miniatures you want to be scaled or colored and what you are looking for. For miniatures from our design partners, I am unable to change the design itself, only elements of the printing process; size, material colors, printing parameters, etc.
- Model is provided to us by The Dragon’s Rest as an officially licensed commercial seller. Please visit https://dragons.rest for the source files. We are capable of printing ALL of The Dragon’s Rest designed models, please contact us for requests of any of the designs and we will add the product for you!