Description

New HeroQuest Dungeon board from Dragons Rest inspired by the newest HeroQuest Tabletop Game.  This board has been remade to have straight walls and corridors to match the newest remake of the HeroQuest Game System.  Measuring in at approximately 39 inches horizontally by 28 3/4 inches vertically.  I am offering this board in TWO variations: Unpainted or Painted.  Unpainted will be printed in grey to allow easy painting for the buyer.  Painted will be painted to resemble the new HeroQuest Tabletop Game, allowing for artistic interpretation, I will do my best to paint it as close to the game as possible, but please keep in mind it is hand painted are there will be variations in the color or details.  BE AWARE CLIP AND MAGNET ASSEMBLY WILL BE REQUIRED.  Your purchase will include enough clips and magnets to do the quick tiles facing each-other, walls, corners and doors.  If you have questions please message me before you purchase.

Includes 345+ Items:

• 57 Quick Tiles
• 176 Walls
• 89 Corners
• 23 Open Hinged Doors

This is a large print and will take approximately 3 weeks to print.  As always I will try to get it printed and completed sooner.

This product uses the DRMC Clip System by Dragons Rest which supports standard and magnetic clips.   Please be aware, the DRMC Clip System is not intended to be used with other tile systems.

Details

• I print to order most items to order and typically need 1 to 3 days for single items like miniatures or terrain elements and 3 to 5 days for most bundles. All orders have a standard processing time of 10 days unless explicitly stated otherwise; for example for large systems or complete builds.
• Printed with Non-Toxic PLA utilizing an FDM (FFF) printing process. PLA is a vegetable-based material and is a fully biodegradable, recyclable, and renewable material. PLA starts to melt around 178°C or 350°F and can start to become malleable around 60°C or 140°C. PLA is very stable when stored out of direct sunlight (for extended periods) and in a climate-controlled environment, for example inside a residence.
• Material color can differ from the images. As a standard, I try and print miniatures with gray or blue translucent color, rocks stones with a gray or granite color, wood foliage with a brown or wooden color, terrain (outside of rocks stone). My goal is to match the print material to make sense with the object being printed to give a good base for you applying your own style via painting. Due to supply shortages, prints may be printed in gray material.
• Some prints within jobs may have differing colors due to filament manufacturer formula changes.  I do my best to avoid any of these possibilities, however you may find some slight color changes.
• Scaled for use with 28mm miniatures feet to eyes and with a base diameter of 25mm. Models may vary slightly in size due to the printing process and expansion contraction of the material.
• All of my prints are unfinished. At times, some clean up may be required as some lines or imperfections may be seen. I do print slowly and perform a quality check on all prints before shipping or delivery. All models will need some final work before use or painting in the form of sanding and/or priming. Prints may require assembly which could include the use of adhesives, we recommend a clear Epoxy Glue.
• I include some items in the pictures to give a sense of the scale of the print. Some items I commonly use are dice, terrains, tiles, and miniatures. These are not included in the item being purchased unless expressly called out in the description. Bundles, Systems, Complete games, etc will include a list of all the elements included in the purchase, items not expressly listed but in pictures are not included in the purchase.
• CAUTION CHOKING HAZARD! This is not intended for use by children and contains small parts that pose a choking hazard and may contain sharp edges or points. Keep away from children and pets!

Notes

• If you want a custom color(s) or custom scale for the models we can provide that for you. Please contact me for a quote with all the models & miniatures you want to be scaled or colored and what you are looking for. For miniatures from our design partners, I am unable to change the design itself, only elements of the printing process; size, material colors, printing parameters, etc.
• Model is provided to us by The Dragon’s Rest as an officially licensed commercial seller. Please visit https://dragons.rest for the source files. We are capable of printing ALL of The Dragon’s Rest designed models, please contact us for requests of any of the designs and we will add the product for you!